关于 IEC

IEC - International Electrotechnical Commission IEC's activities, collectively known as electrotechnology, cover all electrical, electronic and associated technologies in the areas of power generation, transmission and distribution, medical equipment, semiconductors, fibre optics, nanotechnology and renewable energies. In addition to providing an excellent framework for improving safety and optimizing energy, IEC standards support trade between countries by providing a reference for the functioning of the World Trade Organization (WTO) Agreement on Technical Barriers to Trade.

IEC 新发布标准清单（共 318 项）

下表列出 IEC 近期发布的标准共 318 项，含标准号、发布日期与标准名称，按发布机构原始清单顺序整理；需要现行版本或历史版本时，请以标准号为准核对。

标准号发布日期标准名称
IEC /SRD 63459 Ed. 1.0 en:202606/01/2026.Template for smart manufacturing use cases
IEC 60034-1 Ed. 15.0 b:202603/01/2026.Rotating electrical machines - Part 1: Rating and performance
IEC 60034-26 Ed. 2.0 b:202601/01/2026.Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors
IEC 60034-8 Ed. 4.0 b:202606/01/2026.Rotating electrical machines - Part 8: Terminal markings and direction of rotation
IEC 60034-SER Ed. 1.0 b:202601/01/2026.Rotating electrical machines - ALL PARTS
IEC 60060-SER Ed. 1.0 b:202601/01/2026.High-voltage test techniques - ALL PARTS
IEC 60068-2-SER Ed. 1.0 b:202601/01/2026.Environmental testing - Part 2: Tests - ALL PARTS
IEC 60071-SER Ed. 1.0 b:202601/01/2026.Insulation co-ordination - ALL PARTS
IEC 60072-3 Ed. 2.0 b:202602/01/2026.Rotating electrical machines - Dimensions and output series - Part 3: Small built-in motors - Flange numbers BF10 to BF50
IEC 60076-4 Ed. 2.0 b:202607/01/2026.Power transformers - Part 4: Lightning impulse and switching impulse tests of power transformers and reactors
IEC 60079-0 Ed. 8.0 b:202606/01/2026.Explosive atmospheres - Part 0: Equipment - General requirements
IEC 60079-10-2 Ed. 3.0 b:202606/01/2026.Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
IEC 60079-SER Ed. 1.0 b:202601/01/2026.Explosive atmospheres - ALL PARTS
IEC 60086-1 Ed. 14.0 b:202606/01/2026.Primary batteries - Part 1: General
IEC 60086-2-1 Ed. 1.0 b:202606/01/2026.Primary batteries - Part 2-1: Physical and electrical specifications of batteries with aqueous electrolyte
IEC 60086-SER Ed. 1.0 b:202601/01/2026.Primary batteries - ALL PARTS
IEC 60092-504 Ed. 5.0 en:202604/01/2026.Electrical installations in ships - Part 504: Automation, control and instrumentation
IEC 60092-SER Ed. 1.0 b:202601/01/2026.Electrical installations in ships - ALL PARTS
IEC 60127-4 Ed. 4.0 b:202603/01/2026.Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
IEC 60127-7 Ed. 3.0 b:202605/01/2026.Miniature fuses - Part 7: Miniature fuse-links for special application
IEC 60204-SER Ed. 1.0 b:202601/01/2026.Safety of machinery - Electrical equipment of machines - ALL PARTS
IEC 60205 Ed. 5.0 en:202603/01/2026.Calculation of the effective parameters of magnetic piece parts
IEC 60245-1 Ed. 5.0 en:202603/01/2026.Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 60245-3 Ed. 3.0 en:202603/01/2026.Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
IEC 60245-4 Ed. 4.0 en:202604/01/2026.Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
IEC 60245-6 Ed. 3.0 en:202603/01/2026.Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
IEC 60245-7 Ed. 2.0 en:202603/01/2026.Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
IEC 60245-8 Ed. 2.0 en:202604/01/2026.Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
IEC 60287-SER Ed. 1.0 b:202601/01/2026.Electric cables - ALL PARTS
IEC 60310 Ed. 5.0 en:202604/01/2026.Railway applications - Transformers and inductors on board rolling stock
IEC 60332-SER Ed. 1.0 b:202601/01/2026.Tests on electric and optical fibre cables under fire conditions - ALL PARTS
IEC 60335-2-105 Ed. 3.0 b:202602/01/2026.Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets
IEC 60335-2-109 Ed. 2.1 en:202606/01/2026.Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances
IEC 60335-2-120 Ed. 1.1 en:202607/01/2026.Household and similar electrical appliances - Safety - Part 2-120: Particular requirements for the safety of appliances for the generation of directly inhalable aerosols CONSOLIDATED VERSION
IEC 60335-2-2 Ed. 8.0 en:202607/01/2026.Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
IEC 60335-2-23 Ed. 7.0 b:202602/01/2026.Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for hair care and similar appliances
IEC 60352-7 Ed. 3.0 b:202601/01/2026.Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance
IEC 60364-7-711 Ed. 3.0 b:202601/01/2026.Low-voltage electrical installations - Part 7-711: Requirements for special installations or locations - Temporary electrical installations for exhibitions and entertainment related purposes
IEC 60364-7-717 Ed. 3.0 b:202601/01/2026.Low-voltage electrical installations - Part 7-717: Requirements for special installations or locations - Mobile or transportable units
IEC 60364-8-81 Ed. 1.0 b:202602/01/2026.Low-voltage electrical installations - Part 8-81: Functional aspects - Energy efficiency
IEC 60364-8-82 Ed. 1.1 en:202604/01/2026.Low-voltage electrical installations - Part 8-82: Functional aspects - Prosumer's low-voltage electrical installations - CONSOLIDATED VERSION
IEC 60404-8-3 Ed. 4.1 en:202606/01/2026.Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the semi-processed state
IEC 60404-8-4 Ed. 4.1 en:202606/01/2026.Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
IEC 60404-8-5 Ed. 2.1 en:202606/01/2026.Magnetic materials - Part 8-5: Specifications for individual materials - Electrical steel strip and sheet with specified mechanical properties and magnetic polarization
IEC 60404-8-8 Ed. 2.1 en:202606/01/2026.Magnetic materials - Part 8-8: Specifications for individual materials - Thin electrical steel strip and sheet for use at medium frequencies - CONSOLIDATED VERSION
IEC 60413 Ed. 2.0 b:202603/01/2026.Test procedures for determining physical properties of brush materials
IEC 60444-11 Ed. 2.0 b:202604/01/2026.Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction
IEC 60445 Ed. 7.1 en:202601/01/2026.Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors CONSOLIDATED VERSION
IEC 60502-SER Ed. 1.0 b:202601/01/2026.Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - ALL PARTS
IEC 60519-4 Ed. 5.1 en:202602/01/2026.Safety in installations for electroheating and electromagnetic processing - Part 4: Particular requirements for arc furnace installations CONSOLIDATED VERSION
IEC 60601-1-SER Ed. 1.0 b:202601/01/2026.Medical electrical equipment - ALL PARTS
IEC 60601-2-22 Ed. 4.1 en:202604/01/2026.Medical electrical equipment - Part 2-22: Particular requirements for the basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment - CONSOLIDATED VERSION
IEC 60601-2-91 Ed. 1.0 b:202606/01/2026.Medical electrical equipment - Part 2-91: Particular requirements for basic safety and essential performance of non-thermal plasma wound treatment equipment
IEC 60664-SER Ed. 1.0 b:202601/01/2026.Insulation coordination for equipment within low-voltage systems - ALL PARTS
IEC 60691 Ed. 5.2 en:202602/01/2026.Thermal-links - Requirements and application guide CONSOLIDATED EDITION
IEC 60695-2-10 Ed. 4.0 b:202605/01/2026.Fire hazard testing - Part 2-10: Glowing/Hot-wire based test methods - Glow-wire apparatus and common test procedure
IEC 60704-2-1 Ed. 5.0 b:202606/01/2026.Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for dry vacuum cleaners
IEC 60704-2-19 Ed. 1.0 b:202601/01/2026.Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-19: Particular requirements for air cleaners
IEC 60704-2-20 Ed. 1.0 b:202602/01/2026.Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-20: Particular requirements for wet hard floor cleaning appliances
IEC 60721-3-5 Ed. 3.0 b:202601/01/2026.Classification of environmental conditions - Part 3-5: Classification of groups of environmental parameters and their severities - Ground vehicle installations
IEC 60721-3-7 Ed. 3.0 b:202602/02/2026.Classification of environmental conditions - Part 3-7: Classification of groups of environmental parameters and their severities - Portable and non-stationary use
IEC 60730-2-15 Ed. 4.0 b:202604/01/2026.Automatic electrical controls - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls
IEC 60730-2-24 Ed. 1.0 b:202605/01/2026.Automatic electrical controls - Part 2-24: Particular requirements for displacement electrical controls
IEC 60730-2-5 Ed. 5.0 b:202604/01/2026.Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
IEC 60730-2-7 Ed. 4.0 b:202604/01/2026.Automatic electrical controls - Part 2-7: Particular requirements for timers and time switches
IEC 60730-2-9 Ed. 5.0 b:202605/01/2026.Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
IEC 60743 Ed. 3.1 b:202602/01/2026.Live working - Terminology for tools, devices and equipment CONSOLIDATED VERSION
IEC 60747-16-11 Ed. 1.0 en:202604/01/2026.Semiconductor devices - Part 16-11: Microwave integrated circuits - Power detectors
IEC 60747-5-13 Ed. 1.1 en:202601/01/2026.Semiconductor devices - Part 5-13: Optoelectronic devices - Hydrogen sulphide corrosion test for LED packages CONSOLIDATED VERSION
IEC 60747-5-18 Ed. 1.0 en:202606/01/2026.Semiconductor devices - Part 5-18: Optoelectronic devices - Light emitting diodes - Test method of the macro photoluminescence for epitaxial wafers of micro light emitting diodes
IEC 60761-2 Ed. 3.0 b:202605/01/2026.Radiation protection instrumentation - Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 2: Specific requirements for radioactive aerosol monitors including transuranic aerosols
IEC 60794-1-117 Ed. 1.0 b:202605/01/2026.Optical fibre cables - Part 1-117: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Bending stiffness, method E17
IEC 60794-1-125 Ed. 1.0 b:202605/01/2026.Optical fibre cables - Part 1-125: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Ripcord functional test, Method E25
IEC 60794-1-126 Ed. 1.0 b:202604/01/2026.Optical fibre cables - Part 1-126: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Galloping, Method E26
IEC 60794-1-131 Ed. 1.0 b:202601/01/2026.Optical fibre cables - Part 1-131: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Microduct inner clearance test, Method E31
IEC 60794-1-136 Ed. 1.0 b:202604/01/2026.Optical fibre cables - Part 1-136: Generic specification - Basic optical cable test procedures - Determination of the maximum applicable push force during cable installation by blowing
IEC 60794-1-210 Ed. 1.0 b:202606/01/2026.Optical fibre cables - Part 1-210: Generic specification - Basic optical cable test procedures - Environmental test methods - Underwater cable resistance to hydrostatic pressure, Method F10
IEC 60800 Ed. 4.1 en:202606/01/2026.Heating cables with a rated voltage up to and including 300/500 V for comfort heating and prevention of ice formation - CONSOLIDATED VERSION
IEC 60825-SER Ed. 1.0 b:202601/01/2026.Safety of laser products - ALL PARTS
IEC 60870-5-SER Ed. 1.0 b:202601/01/2026.Telecontrol equipment and systems - Part 5: Transmission protocols - ALL PARTS
IEC 60884-3-2 Ed. 1.0 en:202606/01/2026.Plugs and socket-outlets for household and similar purposes - Part 3-2: Particular requirements for accessories incorporating electronic components to perform additional functions
IEC 60904-SER Ed. 1.0 b:202601/01/2026.Photovoltaic devices - ALL PARTS
IEC 60909-0 Ed. 3.0 b:202607/01/2026.Short-circuit currents in three-phase AC systems - Part 0: Calculation of currents
IEC 60940 Ed. 3.0 b:202606/01/2026.Application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression - General rules and safety requirements
IEC 60947-10 Ed. 1.0 b:202605/01/2026.Low-voltage switchgear and controlgear - Part 10: Semiconductor circuit-breakers
IEC 60947-5-5 Ed. 2.0 b:202602/01/2026.Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
IEC 60947-6-1 Ed. 4.0 b:202604/01/2026.Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment
IEC 60947-SER Ed. 1.0 b:202601/01/2026.Low-voltage switchgear and controlgear - ALL PARTS
IEC 60958-SER Ed. 1.0 en:202601/01/2026.Digital audio interface - ALL PARTS
IEC 61000-3-SER Ed. 1.0 b:202601/01/2026.Electromagnetic compatibility (EMC) - Part 3: Limit - ALL PARTS
IEC 61000-6-3 Ed. 4.0 b:202604/01/2026.Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential locations
IEC 61076-2-104 Ed. 3.0 en:202602/01/2026.Connectors for electrical and electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking
IEC 61131-SER Ed. 1.0 b:202601/01/2026.Programmable controllers - ALL PARTS
IEC 61169-1-3 Ed. 1.0 b:202604/01/2026.Radio-frequency connectors - Part 1-3: Electrical test methods - Surge withstand - Surge protective devices built in a coaxial connector - Performance requirements and testing methods
IEC 61196-1-305 Ed. 2.0 en:202603/01/2026.Coaxial communication cables - Part 1-305: Mechanical test methods - Solderability and resistance to soldering
IEC 61196-1-326 Ed. 2.0 en:202604/01/2026.Coaxial communication cables - Part 1-326: Test methods - Clamps test
IEC 61249-3-6 Ed. 1.0 en:202605/01/2026.Materials for circuit boards and other interconnecting structures - Part 3-6: Sectional specification set for unreinforced base materials clad and unclad - Polytetrafluoroethylene (PTFE) filled laminate sheets of defined flammability (vertical burning test), copper-clad
IEC 61254 Ed. 2.0 b:202603/01/2026.Electric shavers for household use - Evaluation of user experience and user satisfaction
IEC 61290-1-2 Ed. 3.0 b:202602/01/2026.Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
IEC 61291-5-2 Amd. 1 Ed. 2.0 b:202602/01/2026.AMENDMENT 1 Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers
IEC 61291-5-2 Ed. 2.1 en:202602/01/2026.Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers CONSOLIDATED VERSION
IEC 61298-1 Ed. 3.0 b:202606/01/2026.Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations
IEC 61298-2 Ed. 3.0 b:202606/01/2026.Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions
IEC 61298-3 Ed. 3.0 b:202606/01/2026.Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities
IEC 61300-2-2 Ed. 4.0 b:202607/01/2026.Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability
IEC 61300-2-33 Ed. 4.0 b:202604/01/2026.Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems, protective housings and hardened connectors
IEC 61300-3-30 Ed. 3.0 b:202607/01/2026.Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Endface geometry of rectangular ferrule
IEC 61332 Ed. 4.0 en:202601/01/2026.Soft ferrite material classification
IEC 61373 Ed. 3.0 en:202607/01/2026.Railway applications - Rolling stock equipment - Shock and vibration tests
IEC 61375-1 Ed. 4.0 b:202603/01/2026.Electronic railway equipment - Train communication network (TCN) - Part 1: General architecture
IEC 61400-40 Ed. 1.0 b:202602/01/2026.Wind energy generation systems - Part 40: Electromagnetic compatibility (EMC) - Requirements and test methods
IEC 61439-8 Ed. 1.0 b:202603/01/2026.Low-voltage switchgear and controlgear assemblies - Part 8: Assemblies for use in photovoltaic installations
IEC 61511-SER Ed. 1.0 b:202601/01/2026.Functional safety - Safety instrumented systems for the process industry sector - ALL PARTS
IEC 61512-1 Ed. 2.0 b:202602/01/2026.Batch control - Part 1: Models and terminology
IEC 61513 Ed. 3.0 en:202606/01/2026.Nuclear power plants - Instrumentation and control important to safety - General requirements for systems
IEC 61514 Ed. 2.0 b:202606/01/2026.Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
IEC 61526 Ed. 4.1 en:202606/01/2026.Radiation protection instrumentation - Measurement of personal dose equivalents for X, gamma, neutron and beta radiations - Active personal dosemeters
IEC 61577-6 Ed. 1.0 en:202603/01/2026.Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 6: Passive integrating radon measurement system using solid-state nuclear track detectors
IEC 61643-361 Ed. 1.0 b:202604/01/2026.Low-voltage surge protective devices - Part 361: Surge isolation transformers (SITs) connected to low-voltage distribution system - Requirements and test methods
IEC 61753-021-03 Ed. 1.0 b:202604/01/2026.Fibre optic interconnecting devices and passive components - Performance standard - Part 021-03: Single-mode fibre optic connectors terminated as pigtails and patchcords for category OP - Outdoor protected environment
IEC 61753-022-02 Ed. 1.0 b:202604/01/2026.Fibre optic interconnecting devices and passive components - Performance standard - Part 022-02: Multimode fibre optic connectors terminated as pigtails and patchcords for category C - Controlled environment
IEC 61753-022-13 Ed. 1.0 b:202604/01/2026.Fibre optic interconnecting devices and passive components - Performance standard - Part 022-13: Multimode fibre optic connectors terminated as pigtails and patchcords for category OP+ HD - Extended outdoor protected environment with additional heat dissipation
IEC 61753-042-02 Ed. 1.0 b:202606/01/2026.Fibre optic interconnecting devices and passive components - Performance standard - Part 042-02: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C - Controlled environments
IEC 61754-2 Ed. 2.0 b:202604/01/2026.Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family
IEC 61754-4 Ed. 3.1 en:202606/01/2026.Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family
IEC 61757 Ed. 2.0 b:202603/01/2026.Fibre optic sensors - Generic specification
IEC 61760-1 Ed. 4.0 b:202606/01/2026.Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)
IEC 61760-4 Ed. 2.0 b:202605/01/2026.Surface mounting technology - Part 4: Classification, packaging, labelling and handling of moisture sensitive devices
IEC 61788-15 Ed. 2.0 b:202603/01/2026.Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
IEC 61803 Ed. 3.0 b:202605/01/2026.Determination of power losses in high-voltage direct current (HVDC) converter stations
IEC 61811-1 Ed. 2.2 en:202607/01/2026.Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification - CONSOLIDATED VERSION
IEC 61837-2 Amd.2 Ed. 3.0 en:20262026Amendment 2 - Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures
IEC 61850-SER Ed. 1.0 en:202601/01/2026.Communication networks and systems for power utility automation - ALL PARTS
IEC 61851-23-1 Ed. 1.0 b:202606/01/2026.Electric vehicle conductive charging system - Part 23-1: DC electric vehicle supply equipment - Automated connection device
IEC 61892-SER Ed. 1.0 en:202601/01/2026.Mobile and fixed offshore units - Electrical installations - ALL PARTS
IEC 61935-2 Amd.1 Ed. 4.0 en:202603/01/2026.AMENDMENT 1 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801-1 and related standards
IEC 61935-2 Ed. 4.1 en:202603/13/2026Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801-1 and related standards
IEC 61937-2 Ed. 3.1 en:202602/01/2026.Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 2: Burst-info CONSOLIDATED VERSION
IEC 61937-SER Ed. 1.0 b:202601/01/2026.Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - ALL PARTS
IEC 61970-SER Ed. 1.0 b:202601/01/2026.Energy management system application program interface (EMS-API) - ALL PARTS
IEC 62024-3 Ed. 1.0 en:202606/01/2026.High frequency inductive components - Electrical characteristics and measuring methods - Part 3: AC loss measured by sinusoidal wave of inductors for DC-to-DC converters
IEC 62046 Ed. 2.0 b:202607/01/2026.Safety of machinery - Application of protective equipment to detect the presence of persons
IEC 62047-4 Ed. 2.0 en:202601/01/2026.Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specification for MEMS
IEC 62047-52 Ed. 1.0 en:202603/01/2026.Semiconductor devices - Micro-electromechanical devices - Part 52: Biaxial tensile testing method for stretchable MEMS
IEC 62061 Ed. 2.2 en:202603/01/2026.Safety of machinery - Functional safety of safety-related control systems
IEC 62127-3 Ed. 2.1 en:202602/01/2026.Ultrasonics - Hydrophones - Part 3: Properties of hydrophones for ultrasonic fields CONSOLIDATED VERSION
IEC 62132-8 Ed. 2.0 b:202602/01/2026.Integrated circuits - Measurement of electromagnetic immunity - Part 8: Measurement of radiated immunity - IC stripline method
IEC 62133-1 Ed. 2.0 b:202603/01/2026.Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems
IEC 62146-1 Ed. 2.0 b:202607/01/2026.Capacitors for high-voltage alternating current circuit-breakers - Part 1: General and grading capacitors
IEC 62196-3 Ed. 3.0 b:202604/01/2026.Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
IEC 62196-7 Ed. 1.0 en:202601/01/2026.Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 7: Vehicle adapters
IEC 62228-7 Ed. 2.0 b:202607/01/2026.Integrated circuits - EMC evaluation of transceivers - Part 7: CXPI transceivers
IEC 62264-2 Ed. 3.0 b:202603/01/2026.Enterprise-Control System Integration - Part 2: Object models and relationships for interfaces between manufacturing operations and business functions
IEC 62271-201 Ed. 3.0 b:202607/01/2026.High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
IEC 62271-SER Ed. 1.0 b:202601/01/2026.High-voltage switchgear and controlgear - ALL PARTS
IEC 62301 Ed. 3.0 en:202605/01/2026.Measurement of standby power for appliances and equipment
IEC 62305-SER Ed. 2.0 b:202601/01/2026.Protection against lightning - ALL PARTS
IEC 62321-14 Ed. 1.0 b:202605/01/2026.Determination of certain substances in electrotechnical products - Part 14: Short-chain chlorinated paraffins (SCCPs) and medium-chain chlorinated paraffins (MCCPs) in plastics by gas chromatography-negative chemical ionization-mass spectrometry (GC-NCI-MS)
IEC 62321-3-1 Ed. 2.0 b:202605/01/2026.Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium, total bromine, total phosphorus, total chlorine, total tin and total antimony content by X-ray fluorescence spectrometry
IEC 62343 Ed. 3.1 en:202601/01/2026.Dynamic modules - Generic specification CONSOLIDATED VERSION
IEC 62351-8 Ed. 2.0 en:202607/01/2026.Power systems management and associated information exchange - Data and communications security - Part 8: Role-based access control for power system management
IEC 62351-SER Ed. 1.0 en:202601/01/2026.Power systems management and associated information exchange - Data and communications security - ALL PARTS
IEC 62358 Ed. 3.0 en:202601/01/2026.Ferrite cores - Standard inductance factor for gapped cores and its tolerance
IEC 62496-4-3 Ed. 1.0 b:202601/01/2026.Optical circuit boards - Part 4-3: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel PMT connector intermateable with a 250-μm pitch MPO 16
IEC 62541-14 Ed. 2.0 b:202601/01/2026.OPC unified architecture - Part 14: PubSub
IEC 62541-2 Ed. 1.0 b:202602/01/2026.OPC unified architecture – Part 2: Security Model
IEC 62541-21 Ed. 1.0 b:202601/01/2026.OPC Unified architecture - Part 21: Device Onboarding
IEC 62541-24 Ed. 1.0 b:202601/01/2026.OPC unified architecture - Part 24: Scheduler
IEC 62541-5 Ed. 4.0 b:202601/01/2026.OPC unified architecture - Part 5: Information Model
IEC 62541-9 Ed. 4.0 b:202604/01/2026.OPC unified architecture - Part 9: Alarms and Conditions
IEC 62561-8 Ed. 1.0 b:202606/01/2026.Lightning protection system components (LPSC) - Part 8: Requirements for components for electrically insulated LPS
IEC 62590-2-2 Ed. 1.0 en:202606/01/2026.Railway applications - Electronic power converters for fixed installations - Part 2-2: DC Traction applications - Controlled converters
IEC 62674-1 Ed. 2.0 b:202607/01/2026.High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment
IEC 62676-6 Ed. 1.0 b:202602/01/2026.Video surveillance systems for use in security applications - Part 6: Performance testing and grading of real-time intelligent video content analysis devices and systems for use in video surveillance applications
IEC 62680-1-2 Ed. 8.0 en:202602/01/2026.Universal Serial Bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification
IEC 62680-1-3 Ed. 7.0 b:202602/01/2026.Universal Serial Bus interfaces for data and power - Part 1-3: Common components - USB Type-C® cable and connector specification
IEC 62683-1 Ed. 2.0 b:202604/01/2026.Switchgear, controlgear and their assemblies for low-voltage - Product data and properties for information exchange - Part 1: Catalogue data
IEC 62715-6-22 Ed. 2.0 en:202606/01/2026.Flexible displays - Part 6-22: Mechanical test methods - Crease and waviness measurement methods for foldable displays
IEC 62715-6-42 Ed. 1.0 en:202606/01/2026.Flexible displays - Part 6-42: Mechanical test methods - Flattening force measurement methods for rollable display devices
IEC 62788-2-1 Ed. 1.1 en:202607/01/2026.Measurement procedures for materials used in photovoltaic modules - Part 2-1: Polymeric materials - Frontsheet and backsheet - Safety requirements - CONSOLIDATED VERSION
IEC 62792 Ed. 2.0 en:202604/01/2026.Measurement method for the output of electroshock weapons
IEC 62820-1-1 Ed. 2.0 b:202603/01/2026.Building intercom systems - Part 1-1: System requirements - General
IEC 62820-1-2 Ed. 2.0 b:202607/01/2026.Building intercom systems - Part 1-2: System requirements - Building intercom systems using the Internet protocol (IP)
IEC 62828-1 Ed. 2.0 b:202606/01/2026.Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters
IEC 62828-2 Ed. 2.0 b:202606/01/2026.Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters
IEC 62841-2-16 Ed. 1.1 en:202602/01/2026.Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-16: Particular requirements for hand-held fastener driving tools CONSOLIDATED VERSION
IEC 62841-2-24 Ed. 1.0 b:202601/01/2026.Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-24: Particular requirements for hand-held oscillating multifunction tools
IEC 62841-3-17 Ed. 1.0 b:202606/01/2026.Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-17: Particular requirements for transportable table masonry saws
IEC 62841-4-10 Ed. 1.0 b:202606/01/2026.Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-10: Particular requirements for pole-mounted pruners
IEC 62841-4-11 Ed. 1.0 b:202606/01/2026.Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-11: Particular requirements for edgers
IEC 62841-4-11 Ed. 1.0 en:202606/01/2026.Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-11: Particular requirements for edgers
IEC 62841-4-9 Ed. 1.0 b:202601/01/2026.Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-9: Particular requirements for battery-powered chain saws for tree service
IEC 62862-3-6 Ed. 1.0 en:202602/01/2026.Solar thermal electric plants - Part 3-6: Durability of silvered-glass reflectors - Laboratory test methods and assessment
IEC 62862-4-2 Ed. 1.0 en:202601/01/2026.Solar thermal electric plants - Part 4-2: Heliostat field control system of solar tower plants
IEC 62885-2 Ed. 3.0 en:202607/01/2026.Surface cleaning appliances - Part 2: Dry vacuum cleaners for household or similar use - Methods for measuring the performance
IEC 62899-402-8 Ed. 1.0 en:202606/01/2026.Printed electronics - Part 402-8: Printability - Measurement of qualities - Shape pattern dimension
IEC 62899-403-2 Ed. 1.0 en:202603/01/2026.Printed electronics - Part 403-2: Printability - Requirements for reproducibility - Basic patterns for printing plate
IEC 62933-5-4 Ed. 1.0 en:202605/01/2026.Electrical energy storage (ESS) systems - Part 5-4: Safety test methods and procedures for grid integrated EES systems - Lithium ion battery-based systems
IEC 63041-3 Ed. 2.0 b:202602/01/2026.Piezoelectric sensors - Part 3: Physical sensors
IEC 63093-10 Ed. 2.0 en:202602/01/2026.Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 10: PM-cores and associated parts
IEC 63093-4 Ed. 2.0 en:202602/01/2026.Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: RM-cores
IEC 63093-9 Ed. 2.0 en:202602/01/2026.Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores
IEC 63138-4 Ed. 1.0 b:202601/01/2026.Multi-channel radio-frequency connectors - Part 4: Sectional specification for type L32-4 and L32-5 circular connectors
IEC 63223-1 Ed. 1.0 b:202607/01/2026.Management of network assets in power systems - Part 1: Overview, principles and terminology
IEC 63230 Ed. 1.0 b:202605/01/2026.Fatigue assessment of hydraulic turbine runners: from design to quality assurance
IEC 63257 Ed. 1.0 b:202605/01/2026.Power line communication for DC shutdown equipment - Communication signal, physical layer
IEC 63316 Ed. 1.0 b:202603/01/2026.Audio/video, information and communication technology equipment - Safety - Power transfer between communication equipment ports using communication wires and cables cabling at non-mains voltage above 60 V DC and ES2/ES3 AC voltage
IEC 63350 Ed. 1.0 b:202601/01/2026.Household electric appliances - Specification of the properties of a digital system for measuring the performance
IEC 63356-1 Ed. 3.0 b:202602/01/2026.LED light source characteristics - Part 1: Data sheets
IEC 63359 Ed. 1.0 b:202602/01/2026.Fluids for electrotechnical application: Specifications for the re-use of mixtures of gases alternative to SF6
IEC 63369-1 Ed. 1.0 b:202604/01/2026.Carbon footprint calculation applicable to industrial lithium-ion batteries - Part 1: General requirements and methodology
IEC 63372 Ed. 1.0 b:202601/01/2026.Quantification and communication of carbon footprint, GHG emission reductions and avoided emissions from electric and electronic products and systems - Principles, methodologies, requirements and guidance
IEC 63378-6 Ed. 1.0 b:202602/01/2026.Thermal standardization on semiconductor packages - Part 6: Thermal resistance and capacitance model for transient temperature prediction at junction and measurement points
IEC 63379 Ed. 1.0 en:202601/01/2026.Vehicle connector, vehicle inlet and cable assembly for megawatt DC charging
IEC 63395 Ed. 1.0 b:202606/01/2026.Sustainable management of waste electrical and electronic equipment (e-waste)
IEC 63413 Ed. 1.0 b:202603/01/2026.Nuclear power plants - Instrumentation and control systems important to safety - Platform qualification
IEC 63423 Ed. 1.0 b:202603/01/2026.Nuclear power plants - Instrumentation and control systems important to safety - Cable connector assemblies for harsh environment purposes
IEC 63458-1 Ed. 1.0 b:202603/01/2026.High pressure water jet machines - Safety - Part 1: High pressure water jet units
IEC 63458-2 Ed. 1.0 b:202603/01/2026.High pressure water jet machines - Safety - Part 2: High pressure hoses, hose lines and connectors
IEC 63458-3 Ed. 1.0 b:202603/01/2026.High pressure water jet machines - Safety - Part 3: High pressure spraying devices
IEC 63465 Ed. 1.0 en:202601/01/2026.Calibration and quality control in the use of radionuclide calibrators
IEC 63474 Ed. 2.0 en:202606/01/2026.Electrical and electronic household and office equipment - Measurement of networked standby power of edge equipment
IEC 63479-2 Ed. 1.0 b:202602/01/2026.Infotainment services for public vehicles (PVIS) - Part 2: Requirements
IEC 63479-3 Ed. 1.0 b:202601/01/2026.Infotainment services for public vehicles (PVIS) - Part 3: Framework
IEC 63494-1 Ed. 1.0 b:202602/01/2026.Lighting systems - Electro-mechanical interfaces - Part 1: Safety
IEC 63494-2-1 Ed. 1.0 b:202602/01/2026.Lighting systems - Electro-mechanical interfaces - Part 2-1: Four-pin extra-low-voltage twist-lock interface Type ZB18
IEC 63497 Ed. 1.0 b:202603/01/2026.Shunt-connected active correction devices (ACD)
IEC 63506 Ed. 1.0 en:202606/01/2026.Calibration of the prompt fission neutron logging tools
IEC 63508 Ed. 1.0 b:202604/01/2026.CDD database - Circuit-breakers and similar equipment for household use
IEC 63517 Ed. 1.0 b:202606/01/2026.Wearable electronic textiles - Test method for performance of heating products - Heating temperature and power consumption
IEC 63522-3 Ed. 1.0 b:202603/01/2026.Electrical relays - Tests and measurements - Part 3: Relay coil properties
IEC 63522-41 Ed. 1.0 b:202604/01/2026.Electrical relays - Tests and measurements - Part 41: Tests and measurement procedures - Insulation coordination
IEC 63522-46 Ed. 1.0 b:202606/01/2026.Electrical relays - Tests and measurements - Part 46: Impulse voltage test
IEC 63522-52 Ed. 1.0 b:202603/01/2026.Electrical relays - Tests and measurements - Part 52: Coil overvoltage
IEC 63545 Ed. 1.0 b:202602/01/2026.Horticultural lighting - Luminaires for horticultural lighting - Safety
IEC 63552 Ed. 1.0 b:202606/01/2026.Switching device for islanding (SDFI)
IEC 63580 Ed. 1.0 b:202607/01/2026.Measuring equipment for electrical and electromagnetic quantities - Environmental aspects
IEC 63585 Ed. 1.0 b:202607/01/2026.Interpretation of dissolved gas analysis (DGA) in natural and synthetic esters
IEC 63589-1 Ed. 1.0 en:202606/01/2026.Linear accelerator - Electron linear accelerator for radiation processing - Part 1: General requirement and test methods
IEC 63601 Ed. 1.0 en:202602/01/2026.Guideline for evaluating bias temperature instability of silicon carbide metal-oxide-semiconductor devices for power electronic conversion
IEC 63602 Ed. 1.0 en:202602/01/2026.Guidelines for representing switching losses of SIC MOSFETs in datasheets
IEC 63652-1 Ed. 1.0 en:202602/01/2026.NFC Forum Specifications - Part 1: NFC Wireless Charging
IEC 63652-2 Ed. 1.0 en:202602/01/2026.NFC Forum Specifications - Part 2: NFC Data Exchange Format
IEC 80601-2-52 Ed. 1.0 b:202605/01/2026.Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds for adults
IEC 81346-14 Ed. 1.0 b:202605/01/2026.Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 14: Manufacturing and processing systems
IEC IEEE 60802 Ed. 1.0 en:202606/01/2026.Time-sensitive networking profile for industrial automation
IEC SRD 63347-2 Ed. 1.0 en:202604/01/2026.Smart city use case collection and analysis - Managing public health emergencies in smart cities - Part 2: Use case analysis
IEC SRD 63443-1 Ed. 1.0 en:202602/01/2026.Distributed energy resource aggregation business - Part 1: System architecture and service scenarios
IEC/PAS 63621 Ed. 1.0 en:202603/01/2026.Artificial intelligence enabled medical devices - Data management
IEC/PAS 63702 Ed. 1.0 en:202606/01/2026.Classification of additive manufacturing and 3D-printing processes for electronics
IEC/PAS 63693 Ed. 1.0 en:202606/01/2026.Industrial networks - Fieldbus specifications - WiTSnet
IEC/TR 62786-100 Ed. 1.0 en:202602/01/2026.Distributed energy resources connection with the grid - Part 100: Generating plants and units grid connection standard mapping
IEC/TR 63145-202-40 Ed. 1.0 en:202602/01/2026.Eyewear display - Part 202-40: General information of AR type - Frontal stray lights
IEC/TR /IEEE 63572 Ed. 1.0 en:202603/01/2026.Evaluation of absorbed power density related to human exposure to radio frequency fields from wireless communication devices operating between 6 GHz and 300 GHz
IEC/TR 60695-11-40 Ed. 1.0 en:202604/01/2026.Fire hazard testing - Part 11-40: Test flames - Confirmatory tests - Guidance
IEC/TR 60695-2-22 Ed. 1.0 en:202603/01/2026.Fire hazard testing - Part 2-22: Glowing/hot-wire based test methods - Results of the round robin tests for the development of IEC TS 60695-2-21:2023
IEC/TR 61400-4-2 Ed. 1.0 en:202602/01/2026.Wind energy generation systems - Part 4-2: Lubrication of drivetrain components in wind turbines
IEC/TR 61643-333 Ed. 1.0 en:202606/01/2026.Components for low-voltage surge protection - Part 333: Characteristic equations and life evaluation for metal oxide varistors (MOV)
IEC/TR 61850-1-1 Ed. 1.0 en:202602/01/2026.Communication networks and systems for power utility automation - Part 1-1: Introduction and overview
IEC/TR 61850-80-5 Ed. 2.0 en:202604/01/2026.Communication networks and systems for power utility automation - Part 80-5: Guideline for mapping information between IEC 61850 and IEC 61158-15
IEC/TR 62271-321 Ed. 1.0 en:202603/01/2026.High voltage switchgear and controlgear - Part 321: Product data and properties for information exchange - Catalogue data
IEC/TR 62316 Ed. 4.0 en:202601/01/2026.Guidance for the interpretation of OTDR backscattering traces for single-mode fibres
IEC/TR 62629-1-3 Ed. 1.0 en:202602/01/2026.3D displays - Part 1-3: Generic - Human depth perception and the determination of the position of 3D object on the non-physical screen
IEC/TR 62908-1-3 Ed. 2.0 en:202606/01/2026.Touch and interactive displays - Part 1-3: Generic - Overview of pen touch technology
IEC/TR 63139 Ed. 2.0 en:202603/01/2026.Explanation and background information on electrical safety requirements in TC 34 standards
IEC/TR 63145-400-20 Ed. 1.0 en:202604/01/2026.Eyewear display - Part 400-20: Introduction to sensing functions - 3D sensing
IEC/TR 63179 Ed. 1.0 en:202601/01/2026.Planning of HVDC systems
IEC/TR 63353 Ed. 1.0 en:202602/01/2026.IIoT applications in power distribution systems management: Architecture and functional requirements
IEC/TR 63384-2 Ed. 1.0 en:202601/01/2026.Power System Stability Control - Part 2: Guideline for quantitative assessment of power system stability and security
IEC/TR 63436 Ed. 1.0 en:202601/01/2026.Insulation monitoring device - Marine AC application example
IEC/TR 63439-1-2 Ed. 1.0 en:202606/01/2026.Robotics for electricity generation, transmission and distribution systems – Part 1-2: State-of-the art and standardization roadmap for electric power system robots
IEC/TR 63614-1 Ed. 1.0 en:202605/01/2026.Multimedia systems and equipment for metaverse - Part 1: General
IEC/TR 63614-3 Ed. 1.0 en:202603/01/2026.Multimedia systems and equipment for metaverse - Part 3: Gap analysis
IEC/TR 63645 Ed. 1.0 en:202603/01/2026.Environmental aspects for lighting - Literature review on lighting products and systems
IEC/TR 63650 Ed. 1.0 en:202606/01/2026.Electrochemical capacitor for use in electrical energy storage
IEC/TR 63669 Ed. 1.0 en:202605/01/2026.Alignment of heterogeneous media data streams
IEC/TR 63675-1 Ed. 1.0 en:202602/01/2026.Transmitting and receiving equipment for radiocommunication - Transciever technologies and their performance standards - Part 1: Low phase-noise oscillator technologies using photonics techniques
IEC/TS 60034-27-6 Ed. 1.0 en:202605/01/2026.Rotating electrical machines - Part 27-6: On-line partial discharge measurements of rotating machine windings supplied from a converter
IEC/TS 60364-7-725 Ed. 1.0 en:202601/01/2026.Low-voltage electrical installations - Part 7-725: Requirements for special installations or locations - Resilient power supply system
IEC/TS 60825-13 Ed. 1.0 en:202602/01/2026.Safety of laser products - Part 13: Measurements for classification of laser products
IEC/TS 60904-1-2 Ed. 2.1 en:202603/01/2026.Photovoltaic devices - Part 1-2: Measurement of current-voltage characteristics of bifacial photovoltaic (PV) devices
IEC/TS 61000-1-6 Ed. 1.0 en:202603/01/2026.Electromagnetic compatibility (EMC) - Part 1-6: General - Guidelines for the evaluation of measurement uncertainty in EMC testing
IEC/TS 61340-5-4 Ed. 2.0 en:202606/01/2026.Electrostatics - Part 5-4: Protection of electronic devices from electrostatic phenomena - Compliance verification
IEC/TS 61400-4-1 Ed. 1.0 en:202602/01/2026.Wind energy generation systems - Part 4-1: Reliability assessment of drivetrain components in wind turbines
IEC/TS 61851-26 Ed. 1.0 en:202602/01/2026.Electric vehicle conductive charging system - Part 26: EV supply equipment with automatic docking of a vehicle coupler located at the underbody of an electric vehicle
IEC/TS 61851-27 Ed. 1.0 en:202602/01/2026.Electric vehicle conductive charging system - Part 27: EV supply equipment with automatic docking of a vehicle coupler according to IEC 62196-2, IEC 62196-3 or IEC TS 62196-3-1
IEC/TS 62001-2 Ed. 1.0 en:202605/01/2026.High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 2: Harmonic performance aspects
IEC/TS 62001-3 Ed. 1.0 en:202605/01/2026.High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 3: Modelling aspects
IEC/TS 62257-200 Ed. 1.0 en:202603/01/2026.Renewable energy off-grid systems - Part 200: System selection and design
IEC/TS 62257-341 Ed. 1.0 en:202605/01/2026.Renewable energy off-grid systems - Part 341: Selection of batteries and battery management systems for standalone electrification systems - Specific case of automotive flooded lead-acid batteries available in developing countries
IEC/TS 62332-1 Ed. 3.0 en:202605/01/2026.Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements
IEC/TS 62461 Ed. 1.0 en:202607/01/2026.Radiation protection instrumentation - Determination of uncertainty in measurement
IEC/TS 62564-1 Ed. 4.0 en:202606/01/2026.Process management for avionics - Aerospace qualified electronic components (AQEC) - Part 1: Integrated circuits and discrete semiconductors
IEC/TS 62565-2-1 Ed. 1.0 en:202605/01/2026.Nanomanufacturing - Product specification - Part 2-1: Carbon nanotube-related products - Blank detail specification: single-walled carbon nanotubes in powders and dispersions
IEC/TS 62565-3-6 Ed. 1.0 en:202602/01/2026.Nanomanufacturing - Product specification - Part 3-6: Graphene-related products – Blank detail specification: graphene oxide in powders and dispersions
IEC/TS 62565-4-3 Ed. 1.0 en:202606/01/2026.Nanomanufacturing - Product specification - Part 4-3: Nanophotonic products - Blank detail specification: quantum dot enabled light emitting diodes
IEC/TS 62607-12-3 Ed. 1.0 en:202606/01/2026.Nanomanufacturing - Key control characteristics - Part 12-3: 2D material-related products - Schottky barrier heights of 2D materialbased field-effect transistors: temperature-dependent current-voltage measurements
IEC/TS 62607-4-10 Ed. 1.0 en:202607/01/2026.Nanomanufacturing - Key control characteristics - Part 4-10: Nano-enabled energy storage - Electrochemical characteristics of carbon nanomaterial for the electrodes of electric double-layer capacitors: coin cell method
IEC/TS 62607-4-11 Ed. 1.0 en:202603/01/2026.Nanomanufacturing - Key control characteristics - Part 4-11: Nano-enabled energy storage - Dispersion stability of nano-carbon materials for the electrodes of lithium-ion capacitors: zeta potential method
IEC/TS 62607-4-9 Ed. 1.0 en:202607/01/2026.Nanomanufacturing - Key control characteristics - Part 4-9: Nano-enabled energy storage - Electrochemical characteristics of carbon nanomaterial for the electrodes of electric double-layer capacitors: Coin cell preparation
IEC/TS 62607-6-36 Ed. 1.0 en:202606/01/2026.Nanomanufacturing - Key control characteristics - Part 6-36: Graphene-related products - Reduction status of graphene oxide and reduced graphene oxide: UV-Vis absorption spectroscopy
IEC/TS 62749 Ed. 3.0 en:202603/01/2026.Assessment of power quality - Characteristics of electricity supplied by public networks
IEC/TS 62786-2 Ed. 1.0 en:202601/01/2026.Distributed energy resources connection with the grid - Part 2: Additional requirements for PV generation systems
IEC/TS 62786-42 Ed. 1.0 en:202601/01/2026.Distributed energy resources connection with the grid - Part 42: Technical requirements for voltage measurement used to control DER and loads
IEC/TS 62876-3-2 Ed. 1.0 en:202604/01/2026.Nanomanufacturing - Reliability and durability assessment - Part 3-2: Graphene - Ellipsometry measurement of graphene
IEC/TS 62885-1 Ed. 4.0 en:202602/01/2026.Surface cleaning appliances - Part 1: General requirements on test material and test equipment
IEC/TS 62898-3-5 Ed. 1.0 en:202606/01/2026.Microgrids - Part 3-5: Technical requirements - Testing for microgrid monitoring, control, and energy management systems
IEC/TS 63042-301 Ed. 2.0 en:202602/01/2026.UHV AC transmission systems - Part 301: On-site acceptance tests
IEC/TS 63042-401 Ed. 1.0 en:202601/01/2026.UHV AC transmission systems - Part 401: Substation maintenance
IEC/TS 63222-1 Ed. 2.0 en:202603/01/2026.Power quality management - Part 1: General guidelines
IEC/TS 63222-4 Ed. 1.0 en:202604/01/2026.Power quality management - Part 4: Harmonic analysis on public electric power network
IEC/TS 63264 Ed. 1.0 en:202604/01/2026.Composite insulators with integrated optical fibres for AC voltages greater than 1 000 V and DC voltage greater than 1 500 V - Definitions, test methods and acceptance criteria
IEC/TS 63346-2-2 Ed. 1.0 en:202607/01/2026.Low-voltage auxiliary power systems - Part 2-2: Design criteria - Low-voltage DC auxiliary power systems for substations
IEC/TS 63371-1 Ed. 1.0 en:202603/01/2026.Materials used in photovoltaic (PV) cells - Part 1: Specifications for electrical characteristics of crystalline silicon wafers
IEC/TS 63444 Ed. 2.0 en:202606/01/2026.Industrial networks - Ethernet-APL port profile / Ethernet-SPE profile specification
IEC/TS 63487 Ed. 1.0 en:202603/01/2026.Joint commissioning for grid-connection of offshore wind farms using VSC HVDC transmission
IEC/TS 63529 Ed. 1.0 en:202604/01/2026.DC side harmonics & filtering in HVDC transmission systems
IEC/TS 63573 Ed. 1.0 en:202604/01/2026.Technical requirements for electrical sheet metal and strip metal used in rotating electrical machines

以上清单由本站整理，如需查询具体标准的现行版本、价格与到货周期，欢迎致电 400-090-1985 或通过页面右侧在线咨询与我们联系。