进口《ASTM E45 钢中夹杂物含量的评定图》到货
站内资讯 · 2026/8/3 · 1 次浏览
ASTM E45 ADJUNCT 1 ADJUNCT TO E45 DETERMINING THE INCLUSION CONTENT OF STEEL (ALSO SEE ASTM E 45 AND ASTM E 45 ADJUNCT 2…
ASTM E45 ADJUNCT 1
ADJUNCT TO E45 DETERMINING THE INCLUSION CONTENT OF STEEL (ALSO SEE ASTM E 45 AND ASTM E 45 ADJUNCT 2)
A series of four photomicrographs of low carbon steel on a single sheet. This adjunct is used in rating samples according to Method B of E45. When required, a series of comparison photomicrographs at 100x, which illustrates all other nonmetallic particles present, may be used to characterize the background appearance of the specimen.
ASTM E45 ADJUNCT 2
ADJUNCT TO E45 DETERMINING THE INCLUSION CONTENT OF STEEL (INCLUSIONS IN STEEL PLATES I-R AND II PLATES) ***ALSO SEE ASTM E 45 AND ASTM E 45 ADJUNCT 1***
2 charts:Plate I-A (approximately 24 by 36 in.) for Determining the Inclusion Content of Steel - This wall chart includes Thin Series and Heavy Series: A-Sulfide Type, B-Alumina Type, C-Silicate Type, and D-Globular Oxide Type for Comparison with Field Area on Specimen of 0.50 mm2/0.000779 in2 (Square Field with sides 0.71 mm/0.0279 in.) at Magnification of 100 Diameters.Plate II (approximately 15 by 20 in.) is a chart for determining the silicate and oxide inclusion content of steel, magnification at X 100.